3D Printer Review: Printrbot Simple Metal cheap desktop kit
Introduction to Honest review of desktop 3D printer Printrbot. The Simple Metal is an upgrade of the last wooden design of this 3D printer. In this version the bed operates on an X-axis and the extruder operates on Y and Z axes respectively. The overall weight and size of this printer has been reduced and it includes sturdy guide rods on the X, Y and Z axis.
The print resolution is 100 microns and the hot end has a 0.4 mm nozzle. Its total print area is nearly 6” x 6” x 6”, it uses a GT2 belt system and a 1.75mm PLA. It cannot print ABS (as there is no heated print bed installed) without modification. The unique feature of Printrbot Simple Metal is that there is an auto-leveling system specially meant for the print bed: there is no manual leveling required as the software automatically levels while printing.
Without any doubt the hardware quality of Printrbot Simple Metal is superior to traditional 3D printers. It’s made of the finest quality materials direct from the USA. You will not find a single part poorly manufactured or made from any cheap materials. At first glance you can see that it has been made to the highest possible standards. According to its, not so expensive, price tag the materials used are equally durable, rigid and sturdy.
Most users want a DIY kit of Printrbot Simple Metal. You will need to spend some time to assemble this printer and it’s important to follow the instructions carefully. Without concentration it might be difficult to build it as the instructions are a bit vague. The good thing is that there are no complex attachments or mechanics and all you do is screw parts together. Some people have experienced part fitting issues which are related to quality control. Printrbot Simple Metal will hopefully fix these issues and, if you don’t want the DIY kit, just order the assembled version of Simple Metal.
You will need to show patience in order to start the firmware and software. Printrbot Simple Metal requires considerable time, as it’s not a mere plug and play device. But, as this version has many users and helpful blogs out there now, you won’t need to struggle much. Beginners will need to watch the auto-leveling system as it requires fine tuning. It is recommended to use Slicr and Repetier in the beginning as you can produce quality results through recommended settings.
Buy on Amazon
Users have described Printrbot Simple Metal, as one of the most impressive 3D printers out there. You can make use of the standard settings and still get some great prints. It is equal to any of the professional 3D printers due to its dual extruders and a large printing area. Through some expert tuning options the results can be similar to that of any heavy duty printer.
Video review of 3D printer Printrbot Simple Metal
|BUILD VOLUME||15 x 15 x 15 cm|
|MIN LAYER HEIGH||100 microns|
|MAX LAYER HEIGHT||-|
|PRINTING SPEED||80 mm/s|
|OPEN SOURCE||Hardware & software|
|CAN YOU USE 3RD PARTY MATERIAL?||Yes|
It’s certainly not for the timid ones. It is best for those, who have already some sort of experience with the 3D printers or at least have some sort of interest. You can’t take it right out of the box plug it and start taking prints immediately. As told above hobbyists will enjoy more working this sort of machine, as it requires time and expertise. The good thing is that it is not much complicated and after some hours of brainstorming a novice can also set it up easily. Its price is not much high, but can deliver good quality 3D prints, total user friendly and has a strong hardware.
Compare this desktop 3D Printer with others products reviewed on our website, go here.